|
2-Slot PMC Carrier Board Package Includes
- One 2-Slot PMC carrier board
Product Description The
2-slot PMC carrier board provides the ability to install up to 2 (two) PMC cards into a small enclosure. The PMC-MC-X2 has one PMC card slot mounted front and and one mounted rear to create a compact arrangement with 2 PMC slots. Suitable for 32/64 with 33/ 66 MHz bus operation. The carrier provides power supplies for the +5, +3.3, +12, and minus 12 from a 12V wall mount transformer supply. Arbitration is accomplished with a CPLD mounted to the card. The CPLD also provides a selectable 66/33 MHz reference clock to be routed to each of the slots.
Key Specifications
-
2 PMC Slots provided.
-
PCI bus can operate at 66 or 33 MHz. User switch to allow or disable 66 MHz. operation.
-
64 or 32 bit operation supported.
-
PMC register definitions as defined by installed hardware. No software set-up required.
-
INTA, B, C, D routed to cPCI connector from PMC. Slot 0 is assumed to be populated with a
PrPMC.
-
PCI signals are routed and terminated IAW the PCI specification.
-
+5, +3.3, +12, -12V VIO supplied to PMC slots.
-
VIO is programmable by the user with a shunt.
-
The PMC-MC-X2 is a low power design with minimal heat dissipation of its own.
-
Front Bezel IO supported.
-
+3V, +5V, +12V, -12V and
"PMC Present".
-
JTAG header connected to PMC supplied. JTAG pin definitions are in the silkscreen.
Item# TD-PMC-CARR-2S ........ $795.00
|
|
