-
Standard logic analyzer
test headers for all PCI signals
-
Clearly marked signals for easy probing, grouped for
direct use with
analyzer
-
ATX PC power connector
allows the use of external ATX power supply for debugging without
motherboard
-
Jumpers for powers allow
to measure current consumption on each power rail
-
Resetable "self-healing"
fuses - no need to replace with new fuses if powers short
-
LED indicators for
powers
-
Zener diode-protected
powers
-
Zero delay on-board
clock driver
-
Selectable clock
frequency - 66MHz or 33MHz
-
Selectable clock source
- On-board or off-board clock
-
64-bit/32-bit selection
-
Keyed for 3.3V & 5.0V
cards
-
Bus 0 ohm resistors on
all PCI signals - allow easy debugging on each signal by disconnecting
the trace
-
Local reset button
allows resetting PCI bus for debugging
-
Multi-layer design with ground and power planes
-
Controlled-Impedance
traces for all high-speed signals
-
Lifts the unit under test off the motherboard for easy
access
-
Extends the life of your motherboard or test system by absorbing the wear and tear of multiple insertion environments.